These Premium kits are assembled by us in the UK with our CG by Jupiter Paper-in-Oil capacitors to give a warmer woody tone, CTS “CGS” SupraPots in the volume position to retain tone and note definition as you roll down the volume to give a more natural control and CTS "CG" for the tone controls.   We then sort through our potentiometers to create matched sets to give you an even response when rolling down your volume and tone controls.

There are many versions of HSS kits out there but this is one that we like a lot, it has 2 volumes and a master tone.   We wire the top volume with a 250K pot for the single coil, a 500K pot for a 4 Wire Humbucker with the option of wiring with a Coil Split, you can select below either a full Coil Split for a really powerfull Humbucker 10K+ or a Partial Coil Split for 8.5K+ Humbuckers.  We would not recomend a coil split on a Low Wind pickup.  We also fit  a 300K pot for the master tone with a 0.05uf capacitor which we find is the best value.  This gives you the best of all worlds with the correct value pots for the different pickups.

In case you do not have the addition volume knob we also offer a knob and tip set with 2 Volume, 1 Tone and matching tips.

In the Kit:

• [1]  500K CTS “CGS” SupraPots, Split Shaft with 9.5mm (3/8") Shaft Diameter and 6.0mm Threaded Length.
• [1] 250K CTS Push Pull Split Shaft Matched Set Potentiometers with 9.5mm (3/8") Shaft
• [1] 250K CTS "CG" Split Shaft Matched Set Potentiometers with 9.5mm (3/8") Shaft Diameter and 6.0mm Threaded Length.
• [1] 0.022uf CG by Jupiter Paper-in-Oil capacitor
• [1] CRL 5-Way Switch 
• [1] Switchcraft 1/4" Mono Input Jack 
• Wiring Diagram

Control Layout:

•     MASTER VOLUME FOR NECK AND MIDDLE
•     VOLUME FOR BRIDGE HUMBUCKER
•     TONE

Switch Positions:

•     BRIDGE WITH OPTION TO COIL SPLIT
•     BRIDGE & MIDDLE IN PARALLEL WITH OPTION TO COIL SPLIT THE BRIDGE
•     MIDDLE
•     MIDDLE & NECK IN PARALLEL
•     NECK